Firewall Settings - D-Link DWR-932 User Manual

Section 3 - Configuration
A firewall helps protect your network from external cyber attack and intrusions. This page allows you to alter your router's firewall settings.

Firewall Settings

Firewall Enable
Clicking this toggle activates the IP Filter. For more
information see IP Filter on page 41.
DMZ Settings
Toggling the DMZ (Demilitarized Zone) will expose a
chosen computer to the outside world by completely
disabling all firewalls and routing all inbound traffic
to the target IP.
Note: This feature is only recommended for advanced
users. Enabling this option will potentially expose your
computer to attacks over the Internet.
PPTP Pass Through
Allows clients to connect to their corporate network
or VPN using the PPTP protocol.
IPsec Pass Through
Allows clients to connect to their corporate network
or VPN using the IPsec protocol.
L2TP Pass Through
Allows clients to connect to their corporate network
or VPN using the L2TP protocol.
WAN Ping Blocking
When enabled the DWR-932 will not
respond to pings from WAN.
Access from WAN
Clicking this toggle allows access from WAN. This
setting may open your router to external security
threats and is not recommended for most users.
Click Apply to save changes.
D-Link DWR-932 User Manual
Firewall Settings
39