Dhcp Service - D-Link DWR-932 User Manual

Section 3 - Configuration
If you selected Configure DHCP:

DHCP Service

Here you can configure the IP address for the DWR-932, as well as the range of
IP addresses that the DHCP will give out.
DHCP Service Enable/disable the DHCP server.
Note: Disabling this server may make the web interface
inaccessible until the router is reset.
IP Address Click on the last digit to alter your router's IP address.
Subnet The subnet that your router is currently using.
IP Range Click on the last two digits to alter the range of
numbers that the DHCP server will give out.
Click Apply to save changes.
D-Link DWR-932 User Manual 37