Table of Contents
Advertisement
RS2610-EN rev.1
7/23/02
Sound Features
Using Preset Equalizer Curves
EN
Press ROCK/CLASSIC, CUSTOM/FLAT, POP/JAZZ on
the main unit or EQ on the remote to toggle among
FLAT, ROCK, POP, JAZZ, CLASSIC & CUSTOM. The
display shows briefly the selection.
Creating a Custom Curve
1. Press CUSTOM/FLAT on the main unit or EQ on
the remote to select CUSTOM mode.
2. While "CUSTOM" is displayed, press SKIP FOR-
WARD
/ SKIP BACKWARD
PREV/REV / NEXT/FWD on the remote to cycle
among bass and treble range
levels.
3. While BAS or TRE is dis-
played, turn the VOLUME
knob to set the associated
gain between -10 - +10.
CD PLAYER
CD-R / RW
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
6
3:11 PM
Page 10
or
BAS+08
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
BASS BOOST
Press BASS BOOST to turn on/off boosting the bass
frequency.
Muting Audio
Press MUTE on the remote
to cut the sound. (Remote
Only)
X- Surround
Press X-SURROUND to enjoy enriched sound quality.
This feature gives you:
1. Better width and depth for vocal and instrumental
sound.
2. More powerful presence for studio recording.
3. Enhanced surround effects with greater flexibility
in positioning speakers.
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE
to open the drawer.
3. Insert up to five discs with label face up. (Press DISC
SKIP to rotate the disc carrier.)
4. Press OPEN/CLOSE
to close the drawer.
Loaded disc position icon lights.
Playing Discs
• Press PLAY/PAUSE
to begin or pause play,
and STOP
to stop play.
• Select a specific disc by pressing DISC 1 - DISC 5.
• Press SKIP FORWARD
BACKWARD
to select a specific track.
Play and load simultaneously by:
1. Press OPEN/CLOSE
to open the tray while a CD
is playing
2. Load/change discs for available trays by pressing
DISC SKIP.
3. Press OPEN/CLOSE
to close the tray.
MUTE
/ SKIP
Advertisement
Table of Contents
