Download Print this page

Tuner; Selecting Tuner; Tuning To A Station; Using Presets - RCA RS2610 User Manual

5cd audio system
Hide thumbs

Advertisement

Table of Contents
RS2610-EN rev.1
7/23/02

Tuner

EN

Selecting Tuner

1. Press SOURCE to select TUNER.
2. Press BAND to select between FM/AMradio band.
Tip: Your audio system has 32 preset stations.

Tuning to a Station

Press SKIP FORWARD
/ SKIP BACK-
WARD
to select frequencies.

Using Presets

The tuner can be either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press TUNE/PRESET
and Tune mode.
• Press SKIP FORWARD
/ SKIP BACK-
WARD
on the
main unit or PRESET UP /
DOWN on the remote
control to access the previous or next preset station.
The display first shows the preset program number
and after a few seconds, the frequency will be dis-
played. (FMPR:01 is FM preset 1)
Auto Preset Programming (for FM only)
Press and hold BAND/DECK1/2/AUTO PROG. button
for 2 second to scan stations in the selected band. The
stations will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is automatic
upon pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
8
3:11 PM
Page 12
z
87.50 MH
to toggle between Preset
PR:01
Manually Setting Presets
1. Press TUNE/PRESET
to enter TUNE mode.
2. Press SKIP FORWARD
WARD
to access the desired frequency.
3. Press the PROG. SET button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP FORWARD
/ SKIP BACKWARD
to move to the desired preset number
(1-32).
6. Press PROG. SET to store the selected frequency at
that preset.

Suppressing Stereo Signal

Press FM ST to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
/ SKIP BACK-

Advertisement

Table of Contents
loading

  Also See for RCA RS2610

  Related Manuals for RCA RS2610