Advertisement
Page 3 of 3
3
In cases of ready access to bare conductors, Receiver may be used to receive the tone.
4. BATTERY REPLACEMENT
1.
Sender battery replacement
Remove the battery cabinet cover on the back of the Sender and replace the old one with new 9V
battery.
2.
Receiver battery replacement
Remove the bolt of the battery cabinet cover on the back of the Receiver, and replace the old one with
the new 9V battery.
ATTENTION
1. When nonuse, takes away the Sender from the test circuitry, and switch to "OFF".
2. Keep away from moisture.
3. Do not use the tester under the high voltage environment. Always follow this user's manual;
otherwise it may cause the damage to the tester or personal injury.
ADDENDA
WWW.TMATLANTIC.COM
Advertisement
