Related Manuals for SamplexPower RC-15A
Summary of Contents for SamplexPower RC-15A
- Page 1 Remote owner's Please read this manual befoRe Manual Control for operating your Inverter RC-15A Remote Control RC-15A...
-
Page 2: Dimensional Drawing
Remote Control, please follow the Safety Instructions given in the owner’s Manual for the inverter. SECTION 2 | DESCRIPTION RC-15A is a wired Remote Control that is compatible with the following series of Inverters: • PST-600-12, PST-600-24 •... - Page 3 Toggle Ground Vbattery LED - “Power ON” LED - “Over Temp” Fig. 2 Remote Control RC-15A - Pinout of Modular Jack RJ-12 / RJ-25 The standard numbering system of the pins of a Modular Jack, when looking into the Jack, is from left to right. As the conductors of the cable are cross- connected (rolled-over), the pinouts at the Modular Jack in the inverter will Figure 2 Remote Control RC-15A; Pintout of Modular Jack RJ-12 / RJ-25 be a mirror image of the pinout of the Modular Jack in the Remote Control as...
-
Page 4: Installation
SECTION 4 | INSTALLATION Please refer to fig. 1. The Remote Control can be flush mounted on a wall or a panel by making a suitable cut out to accommodate the projection in the back. Connect one end of the cable set to the RJ-12 / RJ-25 Modular Jack (5) at the back of the Remote and the other end to the RJ-12 / RJ-25 Jack on the inverter. Ensure that the connection is firm and the tab on the plug securely locks in the jack. SECTION 5 | OPERATION Please refer to fig 1. Please also refer to the owner’s Manual of the inverter for associated details. -
Page 5: Specifications
SECTION 6 | SPECIFICATIONS MoDeL NoS. of PST-600-12, PST-600-24 COMPATibLE iNVERTERS PST-1000-12, PST-1000-24 CAbLe SeT RJ-12 / RJ-25 (6P6C) with crossed-over / rolled-over connections Length = 5M / 16.5 ft. OPERATiNG 0°C to 40°C TEMPERATuRE RANGE 32°F to 104°F DiMENSiONS (L x W x D) 90 x 64.4 x 27.9 mm 3.54 x 2.54 x 1.1 in WEiGhT (WiThOuT CAbLE) 62 gm / 174 gm...