Radio; Operating The Radio - RCA UND RECEIVER RTD250 User Manual

Radio

Operating the Radio

The receiver has a built-in tuner that allows for AM/FM
radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for details)
2. Press ON/STANDBY on the main unit or ON/OFF button
on the remote.
ON/STANDBY
3. Press SOURCE on the front of the unit until the tuner
mode is selected. You may also directly press TUNER on the
remote control.
GRESSIVE SOUND MODE SOURCE
SCAN
VOLUME
4. o select a band, you may press TUNER again on the
remote control. You may also press the BAND/AAP button
on the main unit.
When an FM station broadcasts Stereo sound, ST is dis-
played.
D
i g i t a l
S o u n d
P r o c e s s o r
BAND/AAP REPEAT RAN
5. Tune the a station by pressing TUNER + or TUNER - on
the remote control repeatedly until the desired station is
found.
Alternatively, you can press and hold the same buttons for
about one second to activate the automatic SEARCH func-
tion. In this mode the receiver will automatically tune fre-
quencies until it finds a station.
D I G I T A L
DVD
PRO.LOGIC
VCD
INTRORANDOM
CD
MP3
6. Repeat steps 5 to tune to another radio station.
Select a sound effect if needed by pressing DSP.
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for a better
reception and for a more efficient search.
L C R
LS LFE RS