Advertisement
: You can select this to "Default" or "User"
When "Mode" is "User" , you can change each color value.
: If your receiver connected to TV by using "VIDEO" or "S-VIDEO"
Connector , these items will change the color setting of TV
screen.
: If your receiver connected to TV by using "Component cable
"(Y-Pb-Pr)" , these three items will change the color setting of TV
screen.
About the Receiver
Does not display LED on the
- Connect the power cord to the power outlet
front panel or the receiver has no power.
- Check if the receiver is in standby mode.
- Check if the video output port is firmly
No pictures on the screen
- Check if you have selected the correct
- Connect the audio cords properly.
No sound
- Check the volume level of the TV.
- Press "MUTE" key.
- Point remote control directly towards the
Remote Control does not operate
- Check and replace batteries.
- Check the signal strength in the "Antenna
Poor picture quality
- If this is low, try adjusting the alignment of
On - Screen Error Messages
- Connect the antenna cable properly.
- Check the LNB. Please replace LNB if
Searching Signal
- Check the position of the dish. Please realign
- Check the signal strength in the "Antenna
Setup" menu.
Unrecognized smartcard
- Check the smartcard.
Please insert your smartcard
- Insert the smartcard.
properly.
connected to the Tv.
channel or video output on your TV.
receiver.
Setup" menu.
your dish.
necessary.
dish if necessary.
Advertisement
