Advertisement
menu, and the following screen will be displayed.
To lock receiver, select "Receiver Lock" in the "Parental Control" menu and change it to "On"
mode using the "left/right" keys (
◀∙▶
).
To lock the Main Menu, select "Menu Lock"in the "Parental Control"menu and change it to
"On" mode using the "left/right" keys (
◀∙▶
You can change your PIN code from factory default value "0000" as follow:
Select "Change PIN Code" in the "Parental Control" menu using the "left/right"
keys(
◀∙▶
).
Press "OK" key. Then you will be asked for a new PIN code.
Once you enter a new PIN code, the receiver will ask you to enter it in again.
After you enter a new PIN code twice, the PIN code is changed permanently.
If you forget the PIN code, you have to contact the distributor to find out it.
You can change the time of your receiver and also
switch on/off the timer function in this menu.
Select "Time Settings" item in the " Receiver Settings"
menu and the following screen will be displayed.
This function prevents children or unauthorized
persons from watching programs.
Also you can change PIN(Personal Identification
Number) code.
Select "Parental Control"menu in "Ins
t allation"
t
).
: Select the time mode of your receiver. In Auto mode, your receiver will
use the information from the satellite as time reference. In manual
mode, you can set the time of your receiver manually.
: Set the time offset from the UTC (GMT).
Useful in auto mode only.
: Set the current time manually. Useful in manual mode only.
: Enable or disable the Summer Time. Most European countries use the
Summer Time.
Useful in auto mode only.
: Set the time when the receiver will be automatically turned on
: Set the time when the receiver will be automatically turned off.
You can upgrade the software of this receiver through
serial port when the new software is released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new
software for the receiver.
This is to restore the factory set values in case the user has encountered some problems after
changing any new values of channel data and others which may be in error.
Select "Factory Default" menu in "Installation" menu and press "OK" key.
If you want to continue, select option " Yes" .The receiver will be reset to settings automatically.
Please note that the "Factory Default" procedure may take a few minutes.
Advertisement
