InkTec Monthly Maintenance Guide
Step 5. : NOZZLE WASH
1) Use tongs to clamp the pump line to prevent
SWA draining from the CAP.
2) Pour SWA into the top of the two clean CAPS
until full.
3) Move the head carriage to the CAP and perform a
nozzle wash for ten minutes.
Step 6. : Cleaning the Head Nozzle
1) Repeat step 1 again to move the head carriage.
Coat the superfine fibre cloth (lint free) to clean
2)
the nozzles. Wipe every nozzles up and down fo
ten minutes.
* Note : Do not wipe too hard because it can
damage the nozzles.
InkTec Co., Ltd.
108, Neungan-ro, Danwon-gu, Ansan-si, Gyeonggi-do, 425-839, Korea
www.inktec.com
04