Using The Appliance For The First Time; Daily Use - Hotpoint SA3330HIX Reference Manual

USING THE APPLIANCE FOR THE FIRST TIME

HEATING THE OVEN
A new oven may release odours that have been left
behind during manufacturing – this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.

DAILY USE

1.
SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require.
2.
ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
To end an active function at any time, turn the
selection knob and the thermostat knob to the
position to switch the oven off.
DIAMOND CLEAN FUNCTION
To use the "Diamond Clean" cleaning function, pour
200 ml of drinking water onto the bottom of the oven,
then turn the selection knob and the thermostat knob
to the symbol.
We recommend activating this function for 35
minutes.
Heat the oven to 250 °C for about one hour,
preferably using the "Forced air" function. The oven
must be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time
3.
PREHEATING PHASE
After starting the function, the thermostat LED will
light up to indicate that preheating is in progress.
Once preheating is complete, the thermostat LED will
switch off to indicate that the oven has reached the
set temperature: Place the food into the oven and
proceed with cooking.
Please note: Placing food in the oven before preheating has
finished may have an adverse effect on the final cooking
result.
. SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
while a function is active or when the oven is
switched off.
To set and start the timer, turn the timer knob to the
length of time you require: An audible signal will
sound once the timer has finished counting down the
selected time.
EN
3