Driver Installation - Nvidia Quadro K6000 Series Quick Start Manual

03
HARDWARE INSTALLATION
1
Remove the current graphics driver installed on the host system.
•
Go to Start\Control Panel\Programs and Features
•
Remove the current graphics driver.
2 Power down your system.
3 Unplug the power cord from the AC power source.
4 Remove the side panel from your system to gain access to the motherboard.
Note: Reference your specific computer documents for instructions
on accessing the motherboard in your computer.
5
Remove the existing graphics card if present. If a retention bar is holding
the card in place, remove the screw securing the card.
OR, If there is no existing graphics card, remove the access
covers from the primary x16 PCI slot.
Note:
The NVIDIA Quadro K6000 and K5000 Series are dual-slot
cards and will require two (2) adjacent slots. The NVIDIA Quadro
K4000 Series, K2000 Series, K600 Series, K420, and 410 are single
slot cards and will only require a single (1) slot.
04
CONNECTING TO THE DISPLAY
1
Connect the display cable(s) to your Quadro graphics card.
2
Reconnect your power cord to the workstation.
Quadro K6000, K5200,
and K5000
Quadro K4200, K4000,
K2200, and K2000
Quadro K2000D
Quadro K620 and K600
Quadro K420 and 410
Remove one slot cover for the PCI x16 slot if you
are installing the Quadro K4000 Series, K2000
Series, K600 Series, K420, or 410.
For the Quadro K6000 and K5000 Series
graphics cards, remove two adjacent slot
covers.
DisplayPort Connector
Supports single-lane transfer
rates over a single cable. The
interface is primarily used to
connect a video source to a
display device such as a
computer monitor.
Mini-DisplayPort Connector
DisplayPort Connector
DVI Connectors
Use this to connect a digital
display or, with an adapter,
a VGA display using DVI-to-VGA
adapter.
DVI-D DVI-I
DVI-to-VGA Adapter
(Optional - For use with DVI-I
connectors only)
6
Install the card into the primary x16 PCI slot. Press gently on the
card until it is seated securely in the slot.
7
Secure the card to the system frame using the screw(s) removed
in step 5.
8
Connect the 6-pin auxiliary power cable(s) from the power supply to the
back edge of the Quadro K6000, K5000, or K4000 Series graphics card.
Note: Use the recommended power connector guidelines at
www.nvidia.com/quadropowerguidelines.
9
Install the side panel removed in step 4.
05
SOFTWARE INSTALLATION
AND CONFIGURATION

Driver Installation

With the hardware installed, it is now time to install the graphics driver.
1
Power up your computer, start Windows or Linux, and login with an
account that has Administrator rights.
Note: Since there is no GPU driver currently loaded, the display may
run at reduced resolution or image quality.
2
Download and install the driver.
• Select and download the driver from www.nvidia.com/drivers. Launch
the downloaded executable file, then follow the installer guides to
complete installation.
•
Insert the software installation disc and follow directions for driver
installation.
The installer may require you to reboot your system once the driver
installation is complete.
Congratulations! Your NVIDIA Quadro graphics
card is now ready to use!
Install the graphics card into the primary
x16 PCI slot.
The K6000 and K5000 Series are dual-slot
cards and will cover the adjacent slot. The
remaining graphic cards are single-slot
cards.
The Quadro K5000 and K4000 Series
graphics cards use a single 6-pin power
cable. The K6000 graphics card, uses two
6-pin power cables.
Install the 6-pin auxiliary power cable(s)
from the power supply to the power
connector(s) on the back-edge of the
graphics card using the 6-pin power
cable(s) included in the box.
PNY Technologies, Inc.
100 Jefferson Road, Parsippany, NJ 07054
Tel 408 567 5500 | Fax 408 855 0680
For more information visit:
www.pny.com/quadro