Replacement Parts - Quadra-Fire DV400S Owner's Manual And Installation Instructions

Direct vent room heater

Hide thumbs

Table Of Contents

Table of Contents

DV400S DIRECT VENT ROOM HEATER

Thin Layer of Soot Covers the Glass

1. Are the logs or embers placed incorrectly? (Page 23)

2. Air Shutter may require adj. - Contact qualified installer

ro service dealer.

3. Flue Restrictor may require adj - Contact qualified

installer or service dealer

Stove Design

Many of the components within this gas stove are

designed specifically for safety purposes. It is therefore

imperative that only certified gas service technicians

should service this appliance.

Burner Operation

A millivolt system controls the operation of this stove.

The thermopile and thermocouple generate electricity

when heated by the pilot flame. This electricity is used

to operate the gas valve. Without enough electricity,

the gas valve will not turn on. That is why, when

starting the pilot, the gas control knob has to be

pressed in long enough for the thermocouple to heat

up and generate enough electricity. The thermopile

provides power for the ON/OFF switch, remote control,

or thermostat. Because the thermopile generates the

electricity needed to turn the fireplace on and off, this

stove can be operated when the power is out (although

the blower will not run).

Gas Build Up Prevention Feature

This appliance's utilization of a high-technology gas

valve in conjunction with a pilot flame ensures that no

gas builds up inside the firebox.

The thermocouple (next to the pilot) senses when

the pilot flame is lit. If the pilot flames goes out,

this thermocouple no longer generates electricity,

causing the gas valve to automatically shut off all

gas to the heater, preventing the pilot from spilling

gas into the firebox.

March 4, 2002

DV400S Replacement Parts

DV400S Gas Log Assembly