Quadra-Fire DV400S Owner's Manual And Installation Instructions page 22

WARNING!
Electrical Grounding Instructions
This appliance is equipped with a three-prong
(grounding) plug for your protection against shock
hazard and should be plugged directly into a prop-
erly grounded three-prong receptacle. Do not cut or
remove the grounding prong from this plug.
FAN
CONTROL
BLK
M F
WHT
Blower Wiring Diagram
B. Optional Wall Thermostat
The use of a millivolt Thermostat is allowed. It must be
located within 20 feet of the appliance. In order for the
Thermostat to work, the "ON/OFF" Switch must be in
the "ON" position.
Figure 15 shows how to connect a millivolt Thermostat
without the "ON/OFF" Switch in the Circuit. Disconnect
the "ON/OFF" Switch from the Valve and wire the millivolt
Thermostat as indicated.
Junction Box
W W
B
W
B
Fan
Speed
Ignitor
Control
Figure 15 - Wiring Diagram
March 4, 2002
R
3 2 1
F F
F
RED
BLK
BLK
Fan Assembly
Black = B
White =W
Red = R
B
Convection Air
Temp Switch
Pilot
Assembly
Copper
B
R
R
Valve
Burner
ON/OFF
switch
DV400S DIRECT VENT ROOM HEATER
C. Remote Control
A remote control thermostat may be installed on this stove.
Contact your dealer for the correct model.
D. Warming Shelves/Brackets
Please see the Installation Instructions included with the
Shelves. Refer to page 7, Heater System Components, for
ordering purposes.
Warming Shelf and Bracket
E. Door Trim
Part # 844-0140. Please read the Installation Instructions
included with the Door Trim.
Decorative Glass Accent
Page 22 30211C