Tub And Drum - LG WM2688H*M Training Manual

WM2688H*M
DISASSEMBLY/REPAIR
WM2688H*M

(Tub and Drum)

Removing the tub/drum assembly is
major surgery. It is much lighter if you
remove the weights and the motor.
Generally speaking, you'll have to
remove all that anyway.
1. Remove the motor.
(See page 48.)
2. Drain the water from the sump.
(See page 42.)
3. Remove the control panel.
(See page 39.)
4. Remove the front cabinet.
(See page 39.)
5. Disconnect all hoses and
electrical connections.
6. Separate the three dampers.
(See page 50.) You can
remove just one end now and
the other one after the drum
is out.
7. Pry apart the spring retainer
clip.
8. Carefully lift the tub up off the
springs and remove it from the
machine.
9. Unbolt the bolts around the
circumference of the seam.
Separate the halves. Be careful
to avoid damaging the gasket.
Do not pry on the surfaces
between the halves.
Page 49 of 64
Steam Washer
TRAINING MANUAL