LG WM2688H*M Training Manual page 52

WM2688H*M
WM2688H*M
1. When the TSG is installed in
the washer, the hoses to the
dispenser should fit into the
tubing guides.
2. Be particularly careful when
removing and replacing the
water input hose to the steam
generator. There is a check
valve that fits into the input
port. The valve sometimes
comes off and is stuck in the
hose. This could cause the
water not to flow, which would
cause the steam generator to
malfunction.
3. Pull the check valve out of the
hose gently and replace it into
the water input port. Then slide
the hose onto the port and
install the clamp.
Page 52 of 64
Steam Washer
TRAINING MANUAL