Safety Precautions - Cisco Aironet 1524SB Hardware Manual Addendum

Outdoor mesh access point
Hide thumbs Also See for Aironet 1524SB:
Table of Contents

Advertisement

Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum

Safety Precautions

Warning
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332
Warning
The AC power supply has double pole/neutral fusing. Statement 188
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Class 1 laser product. Statement 1008
Warning
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
Warning
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions. Statement 1015
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1022
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023
Warning
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)
Warning
requirements in IEC 60950 based safety standards. Statement 1033
When installing or replacing the unit, the ground connection must always be made first and
Warning
disconnected last. Statement 1046.
6
OL-19762-01

Advertisement

Table of Contents
loading

Table of Contents