Table of Contents
Advertisement
Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum
Additional Documentation
The following documentation will help you install and configure the access point in your mesh network:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
These documents are available on cisco.com. Follow these steps to download them:
Browse to http://www.cisco.com
Step 1
Click Products and Services. A drop-down window appears. Click Wireless. The Wireless Introduction
Step 2
page appears.
Scroll down and click the Outdoor Wireless link under the Network Solutions heading (center).
Step 3
Click Cisco Aironet 1520 Series under the Related Products heading (center). The Cisco Aironet 1520
Step 4
Series Introduction page appears.
In the Support window, select the All support information for Cisco Aironet 1520 Series link. The
Step 5
Cisco Aironet 1520 Series Support page appears.
Step 6
Select the category of the documentation you wish to download.
Download the document.
Step 7
Before Beginning the Installation
Before you begin the installation process:
•
•
•
•
8
Getting Started Guide: Cisco Aironet 1520 Series Outdoor Mesh Access Points
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points
Cisco Aironet 1520 Series Outdoor Mesh Access Point Power Injector Installation Instructions
AC Power Cords for Cisco Aironet 1520 Series Outdoor Mesh Access Points
Translated Safety Warnings for Cisco Aironet 1520 Series Access Points
Enterprise Mobility Design Guide
Mobile Access Router and Mesh Networks Design Guide
Secure Wireless Design Guide
CSA for WLAN Security
Ethernet Bridging in Point-to-Point Wireless Mesh Network Configuration Example
Cisco Wireless Control System Configuration Guide, Release 5.0
Troubleshooting a Mesh Network
Ensure that a site survey has been performed.
Ensure that your network infrastructure devices are operational and properly configured.
Ensure that your controllers are connected to switch trunk ports.
Ensure that your switch is configured with untagged access ports for connecting your access points.
OL-19762-01
Advertisement
Table of Contents
