Unpacking The Access Point; Package Contents; Tools And Materials That You Supply - Cisco Aironet 1524SB Hardware Manual Addendum

•
•

Unpacking the Access Point

Follow these steps to unpack the access point:
Step 1 Open the shipping container and carefully remove the contents.
Return all packing materials to the shipping container, and save it.
Step 2
Ensure that all items listed in
Step 3
or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:
•
•
•
•
•
•

Tools and Materials That You Supply

•
•
•
•
•
•
•
•
•
•
•
OL-19762-01
Ensure that a DHCP server with Option 43 configured is reachable by your access points, or
manually configure the controller information in the access point (for additional information, refer
to Appendix F of the Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation
Guide.
Become familiar with the access point installation components. Refer to Chapter 2 of the Cisco
Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide.
"Package Contents"
Access point
Cisco product documentation and translated safety warnings
Grounding lug with two screws and lock washers
Three liquid tight adapters
Two-pin DC power connector
Ground lug (Panduit PLCD6-10A-L) and screws with lock washers
Ground lug crimping tool (Panduit CT-720 with CD-720-1 die)
6-AWG copper ground wire
13-mm box-end wrench or socket set
Adjustable wrench, 22-mm socket, or Sealcon S-2200-WR socket wrench
Small flat screwdriver for DC power connector
Optional power injector (AIR-PWRINJ1500-2=)
Optional AC power cord
Antennas, 2.4 and 5 GHz (refer to
Optional pole mount kit (AIR-ACCPMK1520=)
Optional strand mount kit (AIR-ACCSMK1520=)
Optional strap hand tool (AIR-BAND-INST-TL=)
Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum
are included in the shipment. If any item is damaged
Table 1)
9