Defrost - nilan CTS 602 Installation Manual

Defrost

In the "Defrost" menu it is possible to chose how the unit should perform during defrosting of the
evaporator in the exhaust.
" " indicates that the menu point flashes and can be set to another value
ENTER
SERVICE
Nilan reserves the right to alter these instructions without prior notice
Use of the CTS600 panel:
- press ESC to go one step back in the menu
- press qpto move up or down in a menu or to adjust an
activated menu
- press ENTER to activate a menu
- press ENTER to confirm a menu
- press OFF to turn off the unit
- press ON to turn the unit on
HEATING
SURFACE
AIR
EXHANGE
AIR
EXHANGE
ENTER
DEFROST
AIR
USER
TEMP.
BYPASS
CONTROL
OPEN
INLET
PERIODE
CONTROL
ROOM
TERMINAT
CONTROL
T4/6
RESTART
OFF
Adjustable temperature
for discontinuing
defrosting measured on
PRESET
T4, discharge censor
OFF
MANUAL
OFF
PWR SAVE
OFF
MODBUS
ADR 30
DATALOG
INTV 10
Figure 10: The "Defrost" menu
.
Custom injection
during defrosting.
ENTER
EXCH.
ENTER BYPASS
"OPEN"
BYPASS
30 MIN
"CLOSE"
7 °C
Fixed off-period in
minutes between two
defrost modes. Can
be set to anything
from 15 to 720
minutes.
Low-level
injection during
defrosting
AIR EXCH.
"LOW"
AIR
EXCH.
"USER"
AIR EXCH.
"OFF"
Discontinued
injection during
defrosting
Page 13 af 26