Menu; Backlighting; Signal Meter/Battery Meter - GME TX3350 Instruction Manual

MENU

The Menu provides a convenient way to customise your
radios settings. The following Menu options are available
MENU FUNCTION
ITEM
SQL Adjust Squelch Level
CTCSS Set CTCSS or DCS Code
LIGHT
Adjust Display Brightness
COLOR
Adjust Display Colour
WHITE Adjust Colour Saturation
S-METER/ Display S-Meter or Battery
BATT Voltage on the LCD
BEEP Adjust Key Beep-Tone
Volume
DVC
Activate/ Deactivate the
Dynamic Volume Control
SPK Disable the Speaker in
the Radio
MIC Adjust the Microphone
Sensitivity
To use the Menu
Press and hold the
be displayed indicating the first Menu item (Squelch setting
mode) is selected.
Briefly press the key to cycle through the Menu items.
Press the or keys to adjust the selected
Menu item.
When finished, press and hold the
Menu or wait until the Menu times out.
PA G E 8
AVAILABLE
SETTINGS
SQL--1 TO SQL--9
CTCOF
CTC01 -> CTC50
DC001 -> DC104
See Display
See Display
See Display
S-MET / BATT
VOL--0 ->
VOL--9
DVCOF / DVCON
SPKON / SPKOF
MIC+0 > MIC+9
key until the radio beeps. 'SQL' will
key to exit the
To adjust the Squelch sensitivity from the Menu
1. Press and hold the
radio will enter Menu mode and 'SQL' will be displayed.
.
2. Press the
3. To exit, press and hold the
Menu to time out.

BACKLIGHTING

The Liquid Crystal Display and keys are backlit for easy
viewing at night. The backlight remains on while the radio
is switched on. The backlighting brightness, colour and
saturation are all fully adjustable for personal preference.
To adjust the Backlighting
1. Press and hold the
radio will enter Menu mode and 'SQL' will be displayed.
2. Press the
3. Press the
brightness.
4. Press the
5. Press the
colour. The full spectrum of colours is available.
6. Press the
7. Press the
colour saturation of the selected backlight colour from
full colour to white (no colour).
8. To exit, press and hold the
Menu to time out.
For the deepest colour range, reduce the WHITE setting .
TIP:

SIGNAL METER/BATTERY METER

The TX3350 includes a digital signal strength meter that
shows the relative strength of incoming signals on the
display. The meter displays signal strengths in values from 0
(very weak) to 9 (very strong). Signals that exceed strength 9
are shown as 9+
I N S T R U C T I O N M A N U A L
key for several seconds. The
or keys to adjust the Squelch value.
key or wait for the
key for several seconds. The
key repeatedly until 'LIGHT' is displayed.
or keys to adjust the backlight
key briefly. 'COLOR' is displayed.
or keys to adjust the backlight
key briefly. 'WHITE' is displayed.
or keys to adjust the whiteness or
key or wait for the
T X 3 3 5 0