Regulatory Information - HP bt1300 User Manual

Regulatory Information

European Union (EU)
Hewlett-Packard hereby declares that the Bluetooth™ wireless technology built into the hp bt1300
Bluetooth wireless printer adapter, is in compliance with the essential requirements and other relevant
provisions of European Directive 1999/5/EC. The internal Bluetooth function is a Bluetooth power
class 1 intended radio device using the 2.4 GHz frequency band (2.400GHz – 2.4835GHz). It is
intended for wireless communication with other Bluetooth-enabled devices using the Bluetooth
Generic Access, Service Discovery Application, Serial Port and Object Push Networking profiles. The
internal Bluetooth wireless technology complies with all applicable regulations in the following
countries: Austria, Belgium, Denmark, Finland, Greece, Germany, Iceland, Ireland, Luxembourg,
Norway, Portugal, Spain, Sweden, Switzerland, the Netherlands and the United Kingdom.
The use of Bluetooth wireless technology in other countries than those listed above may be restricted:
before using Bluetooth products, please confirm with the frequency management authority in the
country where you plan to use it. In some situations or environments, the use of Bluetooth wireless
technology might be restricted by the proprietor of the building or responsible representatives of the
organization, for example onboard airplanes, in hospitals or in any other environment where the risk of
interference with other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies to the use in a specific organization or environment, you
are encouraged to ask for authorization to use Bluetooth wireless technology prior to switching it on.
Consult your physician or the manufacturer of personal medical devices (pacemakers, hearing aids,
etc.) regarding any restrictions on the use of Bluetooth wireless technology.
United States of America and Canada
Tested to Comply With FCC Standards FOR HOME OR OFFICE USE. See FCC 47CFR, Part
15.19(b)(2).
This device complies with part 15 of the FCC rules and with RSS-210 / RSS-139 of the Industry
Canada.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
The radiated output power of hp bt1300 Bluetooth wireless printer adapter is far below the FCC radio
frequency exposure limits. Nevertheless, the HP Print Adapter shall be used in such a manner that the
potential for human contact during normal operation is minimized. A minimum separation of 20 cm (8
inches) must be maintained between the antenna and the person for this device to satisfy the RF
exposure requirements of the FCC. Note that any changes or modifications to this equipment not
expressly approved by the manufacturer may void the FCC authorization to operate this equipment.
Canada (IC notice)
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to
licensing. The term "IC" before the radio certification number only signifies that Industry of Canada
technical specifications were met.
HP Printer Adapter User's Guide D- 3