64
3-1. Basic operation
Map screen operation
Current position display
1
Press the "MAP" button on the
Remote Touch.
2
Check that the current position
map is displayed.
To correct the current position man-
ually: →P.97
While driving, the current position mark
●
is fixed on the screen and the map moves.
The current position is automatically set
●
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●
After the 12-volt battery disconnection,
or on a new vehicle, the current position
may not be correct. As soon as the sys-
tem receives signals from the GPS, the
correct current position is displayed.
LEXUS
NX300h/NX300
al_USA_OM78229U
Map scale
1
●
The scale of the map screen can be
changed on the touchpad of the Remote
Touch with your finger.
Pinch out on the touchpad to zoom in and
pinch in to zoom out.(→P.32)
The scale indicator bar appears at the
●
bottom of the screen.
Select and hold
●
changing the scale of the map screen.
The scale of the map screen can also be
●
changed by selecting the scale bar
directly. This function is not available
while driving.
In areas where the micro city map is avail-
●
able the map scale changes from
For areas covered by the micro city
map (some major cities), a micro city
map on a scale of 75 ft. (25 m) can be
selected.
When the map is scaled down to 150
ft. (50 m),
can be selected to display the micro
city map.
1
Navi
Manu-
Select
or
to change the
scale of the map screen.
or
when at the minimum range.
Micro city map
changes to
Select
on the map screen.
to continue
to
and