Editing Route - Lexus NX300h Owner's Manual

88
3-3. Route guidance

Editing route

Displaying the edit route screen
1 Select on the map screen.
2 Select the desired item to be set.
Select to display the overview of
A
the entire route. (→P.81)
Select to reorder destinations.
B
(→P.88)
Select to change route type.
C
(→P.88)
Select to set route preferences.
D
(→P.88)
Select to set detours. (→P.88)
E
Select to start from adjacent road.
F
(→P.89)
3
Check that the route overview is
displayed. (→P.81)
Reordering destinations
When more than 1 destination has
been set, the arrival order of the desti-
nations can be changed.
1
Select on the map screen.
2
Select "Reorder".
3 Select the desired destination and
select "Move Up" or "Move Down"
LEXUS NX300h/NX300
al_USA_OM78229U
1
2
3
 The entire route from the starting
point to the destination is displayed.
(→P.81)
 During driving, the route guidance
starts after selecting the desired
route type.
The conditions to determine the route
can be selected from various choices
such as freeways, toll roads, ferries, etc.
1
2
3
● Even if the "Freeways" route preference is
turned off, the route may not be able to
avoid freeways in some cases.
If the calculated route includes a trip by
●
ferry, the route guidance shows a sea
route. After traveling by ferry, the current
position may be incorrect. Upon recep-
tion of GPS signals, it is automatically
corrected.
During the route guidance, the route
can be changed to detour around a
section of the route where a delay is
Navi Manu-
to change the arrival order. Then
select "OK".
Selecting route type
Select on the map screen.
Select "Route Type".
Select the desired route type.
Setting route preferences
Select on the map screen.
Select "Preferences".
Select the desired route prefer-
ences and select "OK".
Detour setting