Lexus NX300h Owner's Manual page 229

8-1. Phone operation (Hands-free system for cellular phones)
3
Select "Message" on the sub
menu.
4
Select the account name.
 Account names are the names of
the accounts that exist on the cur-
rently connected phone.
5
Check that the message inbox
screen is displayed.
To change to the phone mode, select
●
"Phone".
Receiving a message
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is ready
to be operated on the screen.
Select to check the message.
A
Select to not open the message.
B
Select to call the message sender.
C
To display the above screen, it needs to
●
be set to "Full Screen" on "Incoming
SMS/MMS Display" and "Incoming E-
mail Display". (→P.233) Default setting
is "Drop-down".
Depending on the cellular phone used
●
for receiving messages, or its registration
status with the system, some information
may not be displayed.
● The pop-up screen is separately available
for incoming e-mail and SMS/MMS
LEXUS NX300h/NX300
al_USA_OM78229U
messages under the following conditions:
E-mail:
• "E-mail Notification Pop-up" is set to on.
(→P.233)
SMS/MMS:
• "SMS/MMS Notification Pop-up" is set
to on. (→P.233)
• Depending on the type of Bluetooth
phone being connected, E-Mail function
cannot be used via Bluetooth
Checking received messages
1

→
 "MENU" button → "Phone" →
"Message" on the sub menu
2
3
4
A
B
C
Navi Manu-
Display the message inbox screen
by either operation:
switch on the steering wheel
"Message" on the sub menu
Select a desired account name.
Select the desired message from
the list.
Check that the message is dis-
played.
Select to reply to the message.
(→P.230)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select
When "Automatic Message Read-
229
®
®
.
8
.