Installation - Accessories - Wolf COB Technical Manual And Installation Instructions

We recommend making the connection to the heating system with the following parts from the Wolf accessories range.
COB connection set adjacent to the wall comprising:
2 cross pieces, each with one connection
2 Clips
1 Corrugated stainless steel pipes 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
1 silicone grease tube
COB connection set with TS adjacent to the wall comprising:
2 cross pieces, each with two connections
4 Clips
3 Corrugated stainless steel pipe 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
2 corrugated stainless steel pipes ¾", length 800 mm
1 silicone grease tube
1 trimming set ¾"
COB connection set adjacent to the wall for a floorstanding
cylinder up to SEM-1-750 and SE-2-750 comprising:
2 cross pieces, each with two connections
3 Corrugated stainless steel pipe 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
4 Clips
1 silicone grease tube
1 Pipe bend
1 Pump
2 double nipples G 1 (male) - G 1
1 elbow with air vent
TS accessory set for cold water comprising:
1 expansion vessel 8 l
1 cold water connection pipe to the expansion vessel
2 double nipples ¾"
1 trimming set ¾"
TS DHW circulation pump accessory set comprising:
1 analogue DHW circulation pump
1 corrugated stainless steel pipe ¾"
1 trimming set ¾"
Pipe assembly comprising:
1 Circulation pump (EE 0.2)
2 thermometers in flow and return
2 ball valves in flow and return
- Incl. / excl. mixer
- With manifold for 2 or 3 pipe assemblies
Neutralisation box, comprising:
1 granulate fill
1 Installation accessories
(for standard fuel oil EL (sulphur content > 50 ppm),
neutralisation of the condensate is required).
Condensate lifting system with a potential-free alarm output
comprising:
1 Condensate pump with potential-free alarm output
1 Condensate tank with cover and wall mounting bracket
1 PVC hose, 10 mm (6 m long)
1 Non-return valve
1 Condensate inlet adaptor
For further accessories, such as a safety assembly 1" or wall mounting bracket for pipe assembly, etc., see "Heating
systems" pricelist
18
12 Installation - accessories
6 flat packings 1"
2 flat packings 1½" EPDM
1 adaptor fitting G1½ (fem.)
on G1 (male)
3062547_201802