Aftercare - Q Acoustics Concept 500 Owner's Manual

Aftercare

Cabinet Care
Clean cabinets only with a lightly dampened cloth. Do not use solvent based cleaning materials. Never use
abrasives of any kind.
The cabinet surfaces will usually only require light dusting. Should an aerosol or other cleaner be used, apply the
cleaner onto the cloth first and not directly onto the product. Test a small area first, as some cleaning products may
damage the finish. Avoid products that are abrasive, or contain acid or alkaline agents. Do not use any cleaning
materials on the drive units and avoid touching them as damage may result.
Real wood veneers are treated with an ultra-violet resistant lacquer to minimise changes in colour over time.
Nevertheless, like all natural materials, a degree of colour change is to be expected. Keep the speakers away from
direct sources of heat such as radiators and warm air vents in order to minimise the possibility of the wood veneer
cracking. Keep the speakers away from direct bright sunlight.
Grilles
Grilles should only be cleaned using a soft brush when necessary.
If using the Concept 500 with the grilles removed, remember to replace them if pets or children are present.
Drive Units
Do not touch the drive units as they are easily damaged when exposed.
13