DC50 COMFORT DISPLAY
Sdc.2
Main screen
Sdc.3
3 Hours override
This function can be used to override either the desired outlet temperature for 3 hours.
Sdc.3
Sdc.4
1 week override
This function overrides the operating periods for a maximum of 7 days.
Sdc.5
CLIMATIC™50 – Chiller / Heat Pump – Customer version
CL50-CHILLER-IOM_CUST-0808-E
The Sdc.2 screen appears.
If after 5 seconds the display is not correct;
Return
to
the
simultaneously for at least 5 seconds until the Sdc.1 screen
appears.
to position the cursor over the 'Setting' line
Press button
Press, the button
address' line
With the button
connected and confirm with button
Then repeat the procedure "Allocation of Displays to the BM50"
On the first line, as a double display:
Outlet temperature
On the second line:
Outside air temperature
Current time period (Z:A, Z:B, Z:C, Uno)
Mode of operation (Heat, Dead or Cool)
If an override is active, the time period display is alterned with the
'Ove' symbol.
The 'Esc' button is used to cancel the override mode.
From the main screen, press button
Screen Sdc.4 is used to change the override values
The present time period is shown on the 2nd line. This period will remain fixed
for 3 hours.
to position the cursor over the 'Water SP' line
Press
With button
or
to set the desired temperature and confirm with the
'Enter' button.
to position the cursor over the 'Mode SP' line
Press
With button
or
to set the desired mode and confirm with button
The DC50 returns to the main display.
A single press on the 'Esc' button cancels the changes and returns to the
main screen.
From the Sdc.3 screen, press button
'Override a period' line
With button
or
set the period desired and confirm with button
The Sdc.5 screen appears.
With button
or
set the days of the week to the period desired and confirm
with button
.
configuration
mode
again to position the cursor over the 'I/O board
r eplace '- -' with the address of the BM50
or
or
twice to position the cursor over the
by
pressing
buttons
.
Page 18