Filter Replacement; Filter Cleaning And Replacement Cycles; Resetting The Filter Replacement Indicator; Forcible Reset Mode - Coway AP-1216L Owners Instrucitons

FILTER REPLACEMENT

- Check that the 'front' side of filters are in the correct direction.
- To maintain optimal performance of the product, use original Coway filters.
Tips
- Always unplug the air purifier before replacing filters.

Filter cleaning and replacement cycles

Filter
Pre-filter
Odor filter
HEPA filter
- Each service life is based on 8-hour use in maximum air speed.
- The recommended filter replacement cycles may differ depending on the operating
environment.

Resetting the filter replacement indicator

1. Reset indicator blinks when the filter needs to be replaced.
2. Odor LED : Odor Filter
HEPA LED : HEPA filter
3. The pollution level indicator will not turn on if the filter replacement
indicator is activated.
4. After replacing filter, push the Reset button for 2 seconds.

Forcible reset mode

When you have replaced a filter before the filter replacement cycle is reached, you can forcibly
reset the filter replacement cycle back to the factory default setting.
1. When the reset function is not activated, press and hold the reset button for 2 seconds.
2. Press the reset button to select the desired filter to forcibly reset.
Press once : Odor LED (Odor Filter)
Press twice : HEPA LED (HEPA filter)
3. After you select the filter to reset, press and hold the reset button for 2 seconds. And then,the
accumulated time in electronic time counter is erased.
- If there is no input for 5 seconds in forcible reset mode, the reset mode is cancelled.
Cycles
Every 2~4 weeks
Every 6 months
Every 1 year
Method
Cleaning
Replacement
Replacement
2 seconds
12