Rear Io Modules; Removing Rear Io Module; Installing Rear Io Module - Dell EMC DSS 9000R Manual

Next step
1 Install the rack manager module.

Rear IO modules

Removing rear IO module

Prerequisite
Ensure that you read the Safety instructions.
Steps
1 Remove the screws from the rear IO.
2 Remove the rear IO from the power bay.
Figure 87. Removing the rear IO module

Installing rear IO module

1 Insert the rear I/O into the power bay.
2 Secure the rear I/O to the power bay with screws.
Installation and Service Manual
Installing and removing system components
135