Side Turn Signal Lamps - Skoda FABIA 2000 Workshop Manual

FABIA 2000 Electrical System
94-2

Side Turn Signal Lamps

Removing and installing side turn signal
lamps
WARNING!
Disconnect earth cable of battery before working
on the electrical system.
Note
♦
Before disconnecting the battery, determine the radio
code of radio sets fitted with anti-theft coding.
♦
When the battery is re-connected, perform the follow-
ing operations depending on the vehicle equipment:
encode radio, re-set clock, initialise power windows
⇒ Inspection and Maintenance.
Removing
–
Take the 2 screws -4- (1.5 Nm) out of the wheelhouse.
–
Press the turn signal lamp out from the inside with
your hand.
Note
♦
Cover over the paintwork with a suitable protection
(e.g. textile adhesive tape).
♦
The catch -arrow- is positioned at the front right or
front left side of the vehicle, respectively.
–
Pull the turn signal lamp out of the wing.
–
Pull the housing -1- out of the rubber grommet -3-.
–
The bulb -2- can now also be pulled out for replacing.
Installing
–
Installation of the battery is carried out in the reverse
order.
Note
When installing the housing-1-, ensure that the guide lugs
engage in the recesses of the socket.
–
The housing of the turn signal lamp -1- must lock in
place in the wing.
Edition 08.99
S00.5304.00.20
1
Side Turn Signal Lamps
2
3
4
94-2
94
S94-0082
1
page