Skoda FABIA 2000 Workshop Manual page 181

FABIA 2000 Electrical System
Note
The coding specifically sets the universal park aid control
unit -J446 to the requirements of the particular model.
Conduct coding
–
Connect vehicle system tester -V.A.G 1552- and se-
lect „Park aid" (address word 76); ignition is switched
on ⇒ 94-8 page 3.
Readout on display:
–
Function enter „Code control unit" and confirm
0 7
entry with .
Q
Readout on display:
–
Enter code number by referring to table of codes and
confirm entry with
Q
x x x x x Code number
0 without trailer coupling
1 with trailer coupling
0 manual gearbox
1 automatic gearbox
0 without acknowledgement of re-
verse gear engaged
1 with acknowledgement of re-
verse gear engaged
1 FABIA
2 FABIA Sedan, FABIA Combi
3 ŠKODA
The control unit coding appears in the display, e.g. 00123
–
Press .
Q
Readout on display:
–
Select function
0 6
with .
Q
Reading measured value block
For fault finding, display the status of the input signals in
the measured value blocks.
Procedure
Connect vehicle system tester ⇒ 94-8 page 3.
–
Readout on display:
–
Enter 08 for the function „Read measured value block"
and confirm entry with the
Readout on display:
–
Enter the desired three-digit display group number
and confirm entry with the
Edition 04.01
S00.5304.04.20
.
„End output" and confirm entry
key.
Q
key.
Q
Vehicle system test
Select function XX
Coding control unit
Enter code number XXXXX (0-32000)
6Y6919283
Coding 00123
Vehicle system test
Select function XX
Vehicle system test
Select function XX
Read measured value block
Enter display group number XXX
Parking aid
Park aid 0001 Q
WSC 00000
94-8
94
HELP
HELP
HELP
Q
7
page