The Device List In Live Mode - Bosch DiBos Operating Manual

8
Live mode

The device list in live mode

The device list is located on the left-hand side of the screen. Depending on what is selected, the following
are displayed:
•
configured remote stations or cameras.
•
Favorites view.
•
incoming alarms.
Configured cameras and/or remote stations
All locally-connected cameras are listed.
If remote stations have been configured, they are listed along with the cameras connected to
them.
Network remote stations are automatically connected to the local system. Right-clicking on
the remote station icon and selecting the "Disconnect" command disconnects the remote
station.
RAS remote stations must be connected manually. To do so, right-click on the remote station
and select the "Connect" command.
The status of the devices is shown by the icons.
Favorites view
Favorites which have been saved are listed and can be called up by double-clicking on the
icon. New favorites can be created.
Note: A favorite is understood to mean a number of cameras which are displayed in a
specific way, e.g. camera 1 to 4 in the 2 x 2-image window view.
Incoming alarms
The icon flashes red after alarms have been received in the system.
Click on the icon and the flashing stops and the cameras in alarm status are listed. Double-
clicking on the camera icon shows the camera image in the selected window of the image
area. The image can be displayed in any window at all using the "Drag and drop" function.
Enlarging and minimizing device list
Click on the bar between the device list and the control and status field.
F.01U.512.560
Minimizes the device list
Enlarges the device list
Operating Manual
A1/2005-09 Bosch Security Systems
DiBos