Bosch DiBos Operating Manual page 14

14
Live mode
Control field for monitors
After selecting the
can be displayed on the monitors.
A camera or sequence can be assigned to a monitor.
Assign using "Drag and Drop"
Only one camera can be assigned to a monitor with "Drag and Drop". This procedure can be repeated as
often as necessary. When a new user logs on, the camera which has been assigned with "Drag and Drop" is
replaced by the camera assigned in the configuration.
•
Press and hold the left mouse button, drag a camera from the camera list onto the monitor in the
control field.
or
•
Place the mouse cursor in the title bar of an image window, press and hold the left mouse button and
drag the camera onto the monitor.
Assign in the configuration
In the configuration ("Video and audio connections" menu), specify which camera is to be displayed by
default on which monitor, and which cameras are to be played as a sequence.
Note: The configuration specifies which cameras are to be visible for which users ("Authorization levels"
menu).
Enlarge and minimize control and status field
Click on the bar above the control and status field.
F.01U.512.560
tab, 2 monitors are displayed in the control field. Only locally connected cameras
Monitors A and B
Starts the sequence, i.e. the cameras which have been
assigned to the monitor in the configuration are displayed one
after the other.
You return to the "Default view", i.e. the configured camera is
displayed on the monitor.
Enlarges the control and status field.
Minimizes the control and status field.
Operating Manual
A1/2005-09 Bosch Security Systems
DiBos