Operating Procedures - Live / Playback Mode; Display Incoming Alarms - Bosch DiBos Operating Manual

34

Operating procedures - live / playback mode

Operating procedures - live / playback mode

Display incoming alarms

When incoming alarms are received, a red flashing tab
1. Select the tab. The flashing becomes static and the cameras or remote stations in alarm status are
listed.
2. Double-clicking on the camera icon shows the image in the selected window of the image area. The
image can be displayed in any window at all using the "Drag and drop" function.
Note: If several cameras are assigned to one remote station, you must first double click on the remote
station. Only then are the cameras listed and can be selected by double-clicking.
3. By right-clicking on the remote station icon, you can acknowledge the alarm or display all the
cameras in alarm.
Acknowledge alarm
Display all alarms
F.01U.512.560
When the command is selected, the alarm is acknowledged and deleted
from the display.
Note: As incoming alarms are saved in the logbook, they can be called up
at any time in playback mode.
All alarms are displayed in the image area. The system automatically
selected the best type of display.
Operating Manual
is added to the device list.
A1/2005-09
DiBos
Bosch Security Systems