Bosch DiBos Operating Manual page 10

10
Live mode
Control field for dome cameras and pan/tilt cameras
After selecting this tab
control field does not become active until a dome camera or pan/tilt camera is displayed in the selected
image window. When you move the mouse cursor over the various elements, they are highlighted optically.
If no dome camera or pan/tilt camera has been selected, the control field is inactive.
Note: It is also possible to control these functions in the image window.
F.01U.512.560
, the control field for dome cameras and pan/tilt cameras is displayed. The
(on left)
(on right)
Operating Manual
Pan the camera to the left/right.
Pan the camera up/down.
Pans the camera in all directions. To do so, move
the mouse cursor on to the icon, press and hold
the left mouse button, and drag the icon in the
direction that you want to pan the camera in.
Enlarge picture angle (zoom angle) / minimize
picture angle (wide angle)
Focus near / focus far (set the image so it is in
focus)
Close iris/ open iris
Sets the pan speed
Camera positions which have been set can be
called up. To do so, click on the down arrow and
make your selection.
Camera commands which have been saved can
be called up. To do so, click on the down arrow
and make your selection.
A1/2005-09
DiBos
Bosch Security Systems