Advertisement
Quick Links
Advertisement
Related Manuals for Vello BG-P2
Summary of Contents for Vello BG-P2
- Page 1 BG-P2 BATTERY GRIP Designed For The Panasonic Lumix GH5 and GH5s...
- Page 2 Introduction The Vello BG-P2 is compatible with the Panasonic GH5 and GH5s Micro Four Thirds cameras. This grip accepts one Panasonic DMW-BLF19 battery, in addition to the camera’s internal battery, effectively doubling your camera’s runtime. The BG-P2 is equipped with an alternate shutter release, white balance, ISO, EV, and Fn buttons, plus an AF/AE Lock, joystick, and a control lock switch.
- Page 3 Cover the power terminal with the contact Clean this product with only a soft, dry cloth. cap when the BG-P2 is not in use. This prevents Keep this product away from children. electrical shorts caused by metal objects touching the power terminals.
- Page 4 Overview...
- Page 5 Activates the BG-P2’s controls. Your camera will continue to draw power Terminal contacts Front command dial* from the BG-P2 when the switch is in the Off position. The on/off switch is Camera’s contact cap compartment White-balance button* not a power switch.
-
Page 6: Attaching The Grip
Attaching the Grip Make sure your camera is Remove rubber Align the grip’s mounting turned off, and the battery contact from screw, mounting pin, and grip’s control lock is in the bottom of the camera, contacts with the camera’s off position. and store it in the available corresponding slots, and contact cap compartment. - Page 7 Rotate the grip’s locking Tip: If you plan to use a single battery, we recommend inserting the battery into wheel in the direction of the grip (see Inserting a Battery on page 8) rather than into your camera. This the arrow until the grip is way, you will be able to access the battery while the grip is installed.
-
Page 8: Inserting A Battery
The chamber door will battery locks into place. automatically open. Note: If the battery is not in the Note: The BG-P2’s On/Off correct orientation, you won’t switch will not turn off your be able to insert it all the way,... - Page 9 To remove the battery, Note: When using two batteries, one installed in the camera and one in the grip, open the battery chamber you can program your camera to draw power from one battery before the other. and pull the release lever. For more information on this feature, refer to your camera’s instruction manual.
-
Page 10: Specifications
Specifications Power Source One DMW-BLF19 battery Operating Temperature 32°F–104°F (0°C–40°C) Dimensions (W × H × D) 5.3 × 1.5 × 2.5 in. (13.5 × 3.8 × 6.4 cm) Weight 5.7 oz. (161.6 g) excluding battery... -
Page 11: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. - Page 12 www.vellogear.com...