Setting Menu; Setting Procedure - Panasonic PT-FW300NTU Service Manual

PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
Exit:
Exits this application.
9.5.4.2. Receiving and transmitting of the data
Click a target button and specify a file name.
9.5.4.3. Setting the Date/Time
Click "Set Date/Time" button after confirming the date/time and time zone of the PC are accurate.
Note:
The daylight saving time (summer time) setting is not adjusted automatically.
9.5.4.4. Setting the Serial Number
Set the serial number if the A-P.C.Board is replaced and the product serial number disappears.
9.5.4.4.1.

Setting Menu

9.5.4.4.2. Explanation of Buttons
Send:
Sends and writes the serial number to the projector.
Receive:
Receives the serial number from the projector.
Close:
Closes this dialog.
9.5.4.4.3. Equipment to be used
PC, Software for Adjustment
9.5.4.4.4.

Setting Procedure

Set the projector into standby mode (Power indicator on the projector illuminated red), and execute the following procedure.
1. Display Serial Number menu.
2. Click "Send" button after inputting the serial number.
9.5.4.5. Receiving Log Information
Log information on errors etc. that occurred in this projector can be accessed.
31