Removal Of Upper Case; Removal Of A-P.c.board - Panasonic PT-FW300NTU Service Manual

PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
8.2.

Removal of Upper Case

1. Turn the projector upside down.
2. Unscrew the 8 screws.
3. Return the projector to the normal position.
4. Remove the upper case.
8.3.

Removal of A-P.C.Board

1. Remove the upper case according to the section 8.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the connector cover.
Note:
· When reassembling, confirm the interlock switch is
normal status (the switch is in "ON" position).
3. Disconnect all connectors of the cables connected with the
A-P.C.Board.
4. Unscrew the 3 screws and remove the A-P.C.Board block.
5. Unscrew the 2 screws and remove the D-P.C.Board.
6. Unscrew the 3 screws and remove the WL-P.C.Board.
7. Unscrew the 2 screws and remove the connector dustproof
cover.
Note:
· R-P.C.Board is attached on the connector metal
15