Model Information Setup - Panasonic PT-FW300NTU Service Manual

PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
9.7.4.1. Adjustment Procedure for PT-FW300 series
1. Input a window pattern signal to COMPUTER1 IN connector.
Note:
· Use approx. 15 % window pattern as follows.
Black background (screen width) : White window width = 2 : 1
Black background (screen height) : White window height = 3 : 1
· Use the window pattern of WXGA (1 280 x 800).
2. Press "SIDE BY SIDE" button on the remote control to project two different source image at the same time, and switch the input
source of the second (right window) image to "NETWORK".
3. Press "Menu" button on the main unit or remote control to cancel Side-by-side.
4. Display Input Level Adjustment(RGB) menu.
5. Click the OK button.
6. Press "SIDE BY SIDE" button on the remote control, and switch the input source of the second (right window) image to "DVI".
7. Press "Menu" button on the main unit or remote control to cancel Side-by-side.
8. Display Input Level Adjustment(RGB) menu again.
9. Click the OK button.
9.7.4.2. Adjustment Procedure for PT-F300 series
1. Input a window pattern signal to COMPUTER1 IN connector.
Notes:
· Use approx. 15 % window pattern as follows.
Black background (screen width) : White window width = 2 : 1
Black background (screen height) : White window height = 3 : 1
· Use the window pattern of XGA (1 024 x 768).
2. Display Input Level Adjustment(RGB) menu.
3. Click the OK button.
4. Switch connection of the input signal to COMPUTER2 IN connector, and switch the input source to "COMPUTER2".
5. Display Input Level Adjustment(RGB) menu again.
6. Click the OK button.
9.8.

Model Information Setup

Set up the model information if the A-P.C.Board is replaced.
9.8.1. Adjustment Menu
9.8.2. Explanation of Buttons
OK:
Executes model information setup, then closes this dialog.
Cancel:
Cancels this menu.
9.8.3. Equipment to be used
PC, Software for Adjustment
35