Table of Contents
Advertisement
Settings
Settings
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again.
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display the preset sound modes.
2
Select a preset sound mode.
• Pops/Easy/Top40/Jazz/Powerful/Rock/Flat
(Initial)/iPod/User1/User2/User3/User4
Graphic Equalizer
iPod
ALL SRC
Pops
Easy
Top40
Jazz
Powerful
Rock
Flat
iPod
User1
User2
User3
User4
To hide the preset sound modes: Touch [
28
ENGLISH
Store your own sound adjustments
1
Select a preset sound mode.
2
Select a band (
1
) and adjust the level (
then adjust the sound (
Graphic Equalizer
USB
Preset Select
Bass EXT
ON
OFF
OFF
Initialise
Memory
Adjust the sound as follows:
<Bass EXT>
Activates/deactivates bass.
• ON/OFF (Initial)
<SW LEVEL>
Adjusts the subwoofer level.*
• –50 to +10 (Initial: 0)
3
Repeat step 2 to adjust the level of other
].
bands.
4
Touch [Memory] to store adjustment.
A user selection window appears. Select from
[User1] to [User4] to store your adjustment, then
touch [Close] to close the window.
• To apply the adjusted equalizer to all playback
source, touch [ALL SRC], then touch [OK] to
confirm.
• To clear the adjustment, touch [Initialise].
2
),
* Not adjustable when <None> is selected for subwoofer on the
3
).
<Speaker Select> screen. (Page 27)
ALL SRC
<Position/DTA>
You can adjust the sound effects according to your
listening position. You can also localize the sound
image in front of the selected seat.
SW Level
0
Setting the listening position
Touch [Listening Position] (
the listening position ([Front L], [Front R],
[Front All]*, or [All]) (
Position/DTA
* [Front All] is selectable only when <X'over Network> is set to
[2way].
1
), then select
2
).
Listening Position
Front Focus
Front L
Front R
Front All
All
Adjust
Advertisement
Table of Contents
