Table of Contents
Advertisement
Radio
Radio
8 Indicators
• NEWS: Lights up when News Standby Reception
is activated.
• AF: Lights up when Network-Tracking Reception
is activated.
• TI: Lights up in white when receiving the traffic
information, and lights in orange when Traffic
Information Reception is on standby.
• LO.S: Lights up when Local Seek is activated.
• ST: Lights up when receiving a stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
• RDS: Indicates the status of the Radio Data
System station reception when the Network-
Tracking Reception is activated. (Page 17)
− Lights in white: Radio Data System station is
being received.
− Lights in orange: Radio data System station is
not being received.
• EON: Lights up when a Radio Data System station
is sending EON signals.
* See the following "Operation keys on source control screen".
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also "Common operation keys on source control
screen" on page 9.
Touching the operation keys performs the following
actions:
1
[TI]*
(For FM Radio Data System features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready to
switch to traffic information if available.
The TI indicator lights up in white.
• If the TI indicator lights up in orange,
tune into a station providing Radio Data
System signals.
• The volume adjustment for traffic
information is automatically
memorized. The next time the unit
switches to traffic information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[SETUP]*
Displays the <RADIO SETUP> screen.
[MONO]*
Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[LO.S]*
You can tune in FM stations only with
strong signals—Local Seek.
• ON: Tunes in only to FM stations with
sufficient signal strength. The LO.S
indicator lights up.
• OFF (Initial): Deactivates the function.
[PTY]*
(For FM Radio Data System features)
Enters PTY search mode.
1 Touch a PTY code.
2 Touch [Search] to search for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
• You can set language displayed for the
PTY search on the <RADIO SETUP>
screen. (Page 17)
[AME]
Presets stations automatically.
7
[
S
]/[
T
] Searches for a station.
• The search method differs according
to the selected seek mode.
* Appears only when FM is selected as the source.
ENGLISH
15
Advertisement
Table of Contents
