Advertisement

Quick Links

1
Product Introduction ................................................................................ 5
1.1
Product Drawings .......................................................................... 5
1.1.1
1.1.2
1.2
Product Features ........................................................................... 6
1.3
Scope of Application ...................................................................... 6
1.4
Unlock Ways.................................................................................. 7
1.5
Technical Parameter...................................................................... 8
2
Operation ................................................................................................ 9
2.1
Basic Functions ............................................................................. 9
2.1.1
2.1.2
(1)
(2)
2.1.3
2.2
Optional Functions....................................................................... 10
2.2.1
2.2.2
2.2.3
2.2.4
2.2.5
2.2.6
2.2.7
2.3
Operation and Administration ...................................................... 12
2.3.1
(1)
(2)
(3)
2.3.2
2.3.3
2.3.4
2.3.5
Outside Drawing ........................................................................... 5
Dimensioned Drawing .................................................................. 6
Unlock Ways................................................................................. 9
Alarm Function.............................................................................. 9
Low battery warning ..................................................................... 9
Tamper alarm................................................................................ 9
Pseudo Password Alarm .............................................................. 9
Normally-open Function ............................................................. 10
Latch Bolt Alarm Function........................................................... 10
Connecting the Handset Function .............................................. 10
Access Control Function............................................................. 10
Dip Switch Function.................................................................... 10
Double Lock Function................................................................. 11
Door Contact Function................................................................ 11
Keypad Operation Method.......................................................... 12
Keypad Drawing ......................................................................... 12
Password .................................................................................... 12
Fingerprint Number..................................................................... 12
Management of Passwords and Fingerprints............................. 13
Unlock Ways............................................................................... 15
Right of Passwords and Fingerprints.......................................... 15
Points of Fingerprint Acquisition ................................................. 15
Content
1

Advertisement

Table of Contents
loading

Summary of Contents for FingerprintDoorLocks U10

  • Page 1: Table Of Contents

    Content Product Introduction ................5 Product Drawings ................5 1.1.1 Outside Drawing ................5 1.1.2 Dimensioned Drawing ..............6 Product Features ................6 Scope of Application ..............6 Unlock Ways.................. 7 Technical Parameter..............8 Operation ....................9 Basic Functions ................9 2.1.1 Unlock Ways.................
  • Page 2 2.3.6 Emergency Power Supply ............16 2.3.7 Installation of Batteries ............... 16 Installation and Adjustment ..............17 Installation Sketch ............... 17 Installation ................... 18 3.2.1 Step 1 Drilling Holes on the Door ..........18 3.2.2 Step 2 Drilling Holes for Striking Box.......... 18 3.2.3 Step 3 Installation ...............
  • Page 3 Important Notes The fingerprint lock is a high-tech product and its installation will impact its operation and lifetime directly. It is recommended to invite a professional to install the lock according to the user manual. If the lock can not work after installation, please contact with local distributor or agency freely for help.
  • Page 4 Enrollment Form To facilitate the administration of fingerprints and passwords, we have made a form for administrators to record the details of enrollment. You can also design a form to meet your requirements for enrollment. Fingerprint Password Registration Name Signature Note Date...
  • Page 5: Product Introduction

    Product Introduction Product Drawings 1.1.1 Outside Drawing 01 Exterior sliding cover 08 Battery pack cover 02 Nixie tube 09 Batteries 03 Keypad 10 clearance button 04 Reader 11 Interior lock face button 12 USB port 05 Exterior lock face button 06 Exterior lever 13 Interior lever 07 Emergency power supply interface...
  • Page 6: Dimensioned Drawing

    1.1.2 Dimensioned Drawing Front view Front view Side view Back view Side view Product Features Support of unlocking the door by fingerprint, password and mechanical key; Visual digital display and easy operation which are more convenient; Zinc assembly which is more durable, delicate and attractive; With functions of low battery warning, tamper alarm and pseudo password alarm;...
  • Page 7: Unlock Ways

    Unlock Ways Left handed door: When you stand outside the door and the fixed hinges are on the left, the fingerprint lock is then defined as left handed door, which is further divided into left (push) handed door and left (pull) handed door. Right hand door: When you stand outside the door and the fixed hinges are on the right, the fingerprint lock is then defined as right handed door, which is further divided into right (push) handed door and right (pull) handed door.
  • Page 8: Technical Parameter

    Technical Parameter Item Technical Parameters Sensor resolution Bright background, 500dpi Free of damage by 1000 times of continuous Anti-sabotage ability of sensor impact with a 4H pencil 20cm away. Start-up time <1 second Contrast ≤1% ≤0.0001% Search angle 360° Fingerprint enrollment module One fingerprint module is generated at a time Fingerprint update method Automatic update...
  • Page 9: Operation

    Operation Basic Functions 2.1.1 Unlock Ways By fingerprint By password By key 2.1.2 Alarm Function (1) Low battery warning When the lock is in low battery, short beep as warning signal will be heard for three times and red LED light flashes every time when unlocking the door by fingerprint or password, emptying, enrolling or deleting fingerprint.
  • Page 10: Optional Functions

    Optional Functions 2.2.1 Normally-open Function This function is applicable for U10 as well as U30. Method to activate the normally-open function: When successfully open the door with user fingerprint or user password, long beep will be heard once, the motor will be activated and the lock is in unlocked status.
  • Page 11: Double Lock Function

    Diagram of dip switch Diagram of left/right handed door Notes: ① The setting of left handed and right handed shall be consistent with the installation position of the lock, or else, the lock can not work normally. ② The door contact can lock the door automatically only when the contact is installed. ③...
  • Page 12: Operation And Administration

    Operation and Administration 2.3.1 Keypad Operation Method (1) Keypad Drawing There are six keys on the lock; they are “0”, “1”, “2”, “3”, “4” and “#”. Besides inputting numbers, the numeric keys can also be used as the function keys .Passwords and fingerprints can be managed by pressing the following function keys after the verification of administration password or administration fingerprint.
  • Page 13: Management Of Passwords And Fingerprints

    2.3.2 Management of Passwords and Fingerprints Phenomena (when the operation is Object Procedures successful) (1) Remove battery pack cover. Clear Long beep will be heard, “00” will be fingerprints (2) Press and hold fingerprint displayed on the nixie tube and green LED for 10 seconds.①...
  • Page 14 Phenomena (when the operation is Object Procedures successful) Verify administration Long beep will be heard, P0/F000 will be password or administration displayed on the nixie tube and green LED fingerprint light will be on. (2) Press Key “3” “3” will be displayed on the nixie tube Starting the function of add password and a group of number will be displayed on the nixie (3) Press # to confirm...
  • Page 15: Unlock Ways

    fingerprints and user passwords, which only have the right to unlock the door. If handset is included in operation, 3 administration password and 20 administration fingerprint can be enrolled in maximum. 2.3.3 Unlock Ways Unlock Phenomena (when the door is Steps ways successfully unlocked)
  • Page 16: Emergency Power Supply

    2.3.6 Emergency Power Supply In case that battery runs out and mechanical key has not been taken along, an external 9V battery (6F22, 9V) can work as an emergency power supply. Connect it to the interface at the bottom of the exterior assembly to supply power. And then unlock the door by fingerprint or password.
  • Page 17: Installation And Adjustment

    Installation and Adjustment Installation Sketch 01 Battery pack cover 09 Interior shim plate 02 AA batteries Countersunk flat head tapping 03 Screw cover screws 04 Round head flat nose metric screws 11 Mortise 05 Interior assembly 12 Exterior assembly 06 Spindle 13 Wooden door 07 Cross recessed raised countersunk 14 Frame...
  • Page 18: Installation

    Installation 3.2.1 Step 1 Drilling Holes on the Door This product is applicable for wooden doors. The hole pattern figure is as follows (please follow the 1:1 template in the packing list): Ø10 Centerline of Lock fix Centerline of handle Ø20 Ø10 Template of door lock...
  • Page 19: Step 3 Installation

    3.2.3 Step 3 Installation (1) As shown in the figure, insert the mortise and fix it 锁芯 螺钉 on the door with screws. 门 (2) As shown in the figure, install exterior assembly, interior shim plate 门 interior mounting plate on 前锁体...
  • Page 20: Notes For Installation

    Notes for Installation ① Check the door thickness before installation whether it is within the requirements. U10 is applicable for door thickness of 35-95mm, U20 for 35-80mm and U30 is 35-75mm ② Do not press the internal wire harness when fixing assemblies.
  • Page 21: Maintenance

    Maintenance Routine Maintenance The lock face is prohibited to contact with corrosive substances so as not to damage the prevention layer of the lock face and affect the glossiness of lock face. The lever is a key part of the door lock, and its performance will directly influence its operation.
  • Page 22: Faq

    Problem Cause Solution ①Incorrect installation of lock. After successful verification, green problems ②Mechanical Please turn to professionals LED light will be on but mortise or the lock cylinder for help. the door can not be wire harness is damaged or opened.
  • Page 23 Problem Cause Solution 5. After verification of connection wire ①The Invite a professional to check enrolled password loosened. fingerprint, the motor is the door lock and replace the damaged parts. not activated and the ② Problems with motor. door can not be unlocked. Check battery after...
  • Page 24: Appendix

    Appendix Packing list Name Amount Lock assemblies Mortise Striking plate Striking box Screws for mortise and striking plate (optional) Mechanical key User manual Template Warranty card Certificate of quality AA batteries Tools for Installation Hammer- 1 Pencil - 1 Screwdriver-1 Chisel -1 Cutter knife-1 Hand drill-1...

This manual is also suitable for:

U20U30

Table of Contents