Management Of Passwords And Fingerprints - FingerprintDoorLocks U10 Manual

2.3.2 Management of Passwords and Fingerprints

Object
(1) Remove battery pack
cover.
Clear all
fingerprints
(2) Press and hold fingerprint
key
(1) Remove battery pack
cover.
(2) Press and hold password
key
Set
the beep.
administration
password
(3)
password (8 digits)
(4)Press # to confirm.
(1)
password②
(2) Press Key "1"
Enrollment of
administration
(3) Press # to confirm
fingerprint
(4) Press # to confirm
(5)Fingerprint acquisition○ 3
(1)
password or administration
fingerprint
(2) Press Key "1"
Add user
fingerprint
(3) Press # to confirm
(4) Press # to confirm
(5)Fingerprint acquisition
(1)
password or administration
fingerprint
(2) Press Key "2"
Delete user
fingerprint
(single)
(3) Press # to confirm
(4) Press # to confirm
Procedures
for 10 seconds.①
until you hear
Input administration
Verify administration
Verify administration
Verify administration
Phenomena (when the operation is
successful)
Long beep will be heard, "00" will be
displayed on the nixie tube and green LED
light will be on.
Long beep will be heard. P0 will be displayed
on the nixie tube. And then "= =" will be
displayed on the nixie tube and "= =" will
flash.
"= =" will be displayed on the nixie tube
Long beep will be heard. P0 will be displayed
on the nixie tube. And green LED light will be
on.
Long beep will be heard and green LED light
will be on. P0 will be displayed on the nixie
tube.
"1" will be displayed on the nixie tube
F000 will be displayed on the nixie tube and
start the function of add fingerprint.
Light on the reader will be on
Long beep will be heard and green LED light
will be on.
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
"1" will be displayed on the nixie tube
Starting the function of add fingerprint and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another fingerprint numbers.
Light on the reader will be on
Long beep will be heard and green LED light
will be on.
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
"2" will be displayed on the nixie tube
Starting the function of delete fingerprint and
a group of number will be displayed on the
nixie tube. On the other hand, you can also
input another fingerprint numbers.
Long beep will be heard and green LED light
will be on.
13