FingerprintDoorLocks U10 Manual page 14

Object
(1)
password or administration
fingerprint
(2) Press Key "3"
(3) Press # to confirm
Add user
password
(4) Press # to confirm
(5) Input user password (8
digits)
(6) Press # to confirm
(1)
password or administration
fingerprint
(2) Press Key "4"
Delete user
password
(3) Press # to confirm
(single)
(4) Press # to confirm
Notes：
① When clearing all fingerprints and setting the administration password /clearing the
user password, press the corresponding key and hold for 10 seconds, otherwise the system
will have no response, and the operation will fail. Before clearing the fingerprint, if there comes
low battery warning, the initialization may fail. Please replace the batteries before this
operation.
② Method to verify the administration password: input 9 digits, i.e., 1-digit password
number and 8-digit password. Please keep administration password in mind after setting of it.
③ Fingerprint acquisition method: When the light on the reader is on, put the finger on the
reader and the long beep will sound three times, it is indicate the acquisition is done. If there is
just a two short beep it means failed.
④ The administration fingerprint and the administration password can add all fingerprints
and passwords, and delete all fingerprints and password except P0. The administration
password P0 can only be changed by the settings of administration password
⑤ Only an administration fingerprint number 00 and an administration password number
P0 can be enrolled if handset is not included in operation. Other numbers are for user
Procedures
Verify administration
Verify administration
Phenomena (when the operation is
successful)
Long beep will be heard, P0/F000 will be
displayed on the nixie tube and green LED
light will be on.
"3" will be displayed on the nixie tube
Starting the function of add password and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another password numbers.
"=" will be displayed on the nixie tube
"= =" will be displayed on the nixie tube
Long beep will be heard and green LED light
will be on. The number just enrolled will be
displayed on the nixie tube.
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
"4" will be displayed on the nixie tube
Starting the function of delete password and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another password numbers.
Long beep will be heard and green LED light
will be on. The number just been deleted will
be displayed on the nixie tube.
14