Emergency Power Supply; Installation Of Batteries - FingerprintDoorLocks U10 Manual

U series
Table of Contents

Advertisement

OK
OK
OK

2.3.6 Emergency Power Supply

In case that battery runs out and mechanical key has not been taken along, an external 9V
battery (6F22, 9V) can work as an emergency power supply. Connect it to the interface at
the bottom of the exterior assembly to supply power. And then unlock the door by fingerprint
or password.

2.3.7 Installation of Batteries

① Method to install the batteries: Remove the battery pack cover upward, and install four
AA 1.5V batteries, and then the battery pack cover.
② Notes: select the correct type in case of explosion; when out of service for a long period,
batteries should be taken out; never mix the new battery with the used; pay attention to
the positive and negative poles of batteries; preserve the environment by handing over
the used batteries to the designed place for reclaim; keep batteries out reach of
children and pets; in case of contact with skin, clothes or eyes, flush with water and go
to doctor.
NO
NO
NO
NO
OK
NO
NO
16

Advertisement

Table of Contents
loading

Related Products for FingerprintDoorLocks U10

This manual is also suitable for:

U20U30

Table of Contents