Technical Parameter - FingerprintDoorLocks U10 Manual

Technical Parameter

1.5
No.
1 Sensor resolution
2 Anti-sabotage ability of sensor
3 Start-up time
4 Contrast
5 FRR
6 FAR
7 Search angle
8 Fingerprint enrollment module
9 Fingerprint update method
10 Fingerprint information
11 Fingerprint template capacity
12 Light interference
13 Reader
14 Static power consumption
15 Dynamic power consumption
16 Control system
17 Password setting
18 Password length
19 Lifetime of battery
20 Operating voltage
21 Power supply mode
22 Password capacity
23 Emergency power supply
24 Low battery warning
25 Anti-static
26 Operating temperature
27 Operating humidity
28 Storage temperature
29 Open door direction
30 Door access time period groups
(Note: Parameters subject to change without prior notice for technology innovations by the
company).
Item Technical Parameters
Bright background, 500dpi
Free of damage by 1000 times of continuous
impact with a 4H pencil 20cm away.
<1 second
1:N
≤1%
≤0.0001%
360°
One fingerprint module is generated at a time
Automatic update
The fingerprint information will not lose when
out of power or replacing batteries.
100
Avoid bright and direct light
Hard glass, nano-finish surface, extremely
resistant to friction
< 30 µA
<250mA
Single circuit
Random change and combine
9 digits (1-digit ID + 8 digits)
5,000 times to unlock the door
6V DC
Batteries
5 groups
9V DC
4.9V
8KV for touch discharge, and 15KV for air
discharge
-20℃ to 55℃
10%-90%
-20℃ to 70℃
Left handed and right handed
10 groups
8