Table of Contents
Advertisement
User Manual | Mitchell Diagnostics | Scan Tool | 46 | en
Automated System Test (AST) Button
Definitions
Menu Button
Tapping the Menu button displays a pop-
up link that takes the user to help content
related to reading DTCs.
Note: an active internet connection will be
required.
View Help
Selecting View Help will open an online
user manual.
Take Screen Capture
Selecting Take Screen Capture will save a
copy of the current open screen.
Maintenance Tests
Overview
Maintenance Tests provide a way for specific systems
to be recalibrated or reset after service. Maintenance
test availability will vary from vehicle to vehicle, and
will be updated over time.
Maintenance tests are the same as special tests, but
this is a shortcut to most frequently used tests on
the selected vehicle. These specific tests can also be
found under special tests.
ss02844
2007 Jeep Wrangler Unlimited X 3.8L
DTC
DTC
CHECK
CHECK
Read DTCs
Read DTCs
All Systems
Select Systems
Diagnostic information
Automated System Test
Today is Tue, 09 Jan 2018.
1. Select Maintenance Test from the Screen.
©Mitchell International, Inc.
4:09
Data Stream
Special Tests
Maintenance Tests
Enhanced OBDII
ss02810
Select a Maintenance Test Catagory
Battery/Charging
Brake Service
2. Select the desired category for the component or
system being worked on.
Note: If there are no sub-sections available for the selected category
go to step 5.
ss02811
Select a Maintenance Test
Battery Saver relay Control
Generator Lamp
3. Select the desired test to be performed.
ss02812
SPECIAL TESTS
2004 Ford F-150 XL 5.4L INSTRUMENT CLUSTER
Battery Saver Relay Control
Engine Must Not be Running
For this test
Continue
Abort
4. Follow prompts on the screen.
581624 | REV. B | 06.2017 | APDMD032018
Cancel
Cancel
Capture
Menu
Advertisement
Table of Contents
