Yamaha BRX-610 Service Manual page 15

BRX-610/NS-PZ20
Operation Procedure
Using the remote control, perform the following procedure while watching the TV monitor screen.
1. With this unit in the standby mode, press the " " (On/Standby) key to turn on the power.
The initial screen is displayed.
2. Press the "SETUP" key.
The SETUP menu is displayed. (Fig. 4)
Remote control
"SETUP" key
3. Press the " "/" " key to select the System Information.
The new MAC address is displayed. (Fig. 5)
Select the System Information
20
Initial screen
No Disc
Fig. 4
SETUP menu screen
--- System Information ---
Software Version : Ver.1.2110
MAC : 00 -A0 -DE -xx -xx -xx
Fig. 5
SETUP menu screen
New MAC address