Yamaha BRX-610 Service Manual page 12

MENU SUB-MENU
Display TV 3D Output
Setting TV Screen
Video Out Select
TV System
Color Space
HDMI Deep Color
HDMI 1080p 24Hz
Lip Sync
Video Video Mode
Process
Color Adjust
Noise Reduction
De-interlacing Mode
Audio Audio HDMI
Setting Output DRC
Speaker
Configuration
Setting
2ch Downmix
Test Tone
Subwoofer Size
Post Up Mix
Process
System
Information
[Auto] / Off
16:9 Full / [16:9 Normal] / 4:3 Pan Scan / 4:3 Letterbox
Composite / [HDMI Auto] / HDMI 1080p / HDMI 1080i / HDMI 720p / HDMI 480p/576p
/ HDMI 480i/576i
[NTSC] / PAL / Multi (U, C models)
NTSC / [PAL] / Multi (T, G, F, L models)
[YCbCr 4:4:4] / YCbCr 4:2:2 / Full RGB / RGB
30 bits / 36 bits / [Off]
[Auto] / Off
[Auto] / Manual (2D / 3D) / Off
[Standard] / Vivid / Cinema / Custom
Select "Custom" .
Brightness / Saturation / Hue / Contrast / Sharpness / CTI
* Default settings: 0
Brightness / Saturation / Hue for each color (Red/Green/Blue/Yellow/Cyan/Magenta)
* Default settings: 0
[0] / 1 / 2 / 3
[Auto] / Film / Video
Bitstream / PCM / [Off]
[Off] / On / Auto
Set the output of 5.1 ch surround depending on the connected speakers.
Press / to select a speaker, press ENTER.
Size: Large / [Small]
Trim: -6 to +6 dB (in 0.5 dB step)
* Default settings: 0
Delay: 0.5 to 10 m (in 0.5 m step)
* Default settings: 3 m
Disable: Yes / [No]
[Stereo] / Lt/Rt
check if the speaker setting is correct by outputting the test tone.
[Small] / Large
[Off] / Dolby PLII / DTS NEO:6
Software version and MAC address are displayed.
BRX-610/NS-PZ20
VALUE
17